1. Before cleaning, first unplug the vacuum cleaner and make it in the state of shutting down and not powering on.

2. Remove the magic wand and the hose, loosen the connection between the two hoses, remove the magic wand from the hose, and then remove the hose.

3. Gently remove the sticky debris in the blockage, wash the blockage of the wand and the hose with soapy water and dry.

4. There are a lot of hair and debris in the cleaning head and brush stick. Follow the instructions to disassemble the cleaning head and brush stick, wash and dry.

5. Disassemble the bottom plate, remove the brush stick and the hair fragments at the connection between the brush stick and the vacuum cleaner, clean it and dry it before assembling it.

6. Remove the cyclone separator, check and remove debris. Remove the inner hose, remove visible debris, and replace the inner hose collar.

7. Pull out the transparent tank, remove the filter, clean the filter, and put the filter back into the vacuum cleaner after drying.

8. Disassemble and clean all accessories, wash all non-mechanical accessories, including small plastic parts and small brushes.

9. Empty the lower tank, wash the top tank with soapy water, clean up the debris with a soap cloth, and dry.

10. Clean the handle, plastic back and bottom with a cleaning cloth, and scrub the dusty place. Reorganize the vacuum cleaner.

What parts are included in the cleaning of the vacuum cleaner

1. Clean appearance

The appearance should be cleaned with a soft cloth dipped in soapy water. Do not clean with organic solvents to avoid cracking, fading or paint peeling of the plastic on the surface. Do not clean with hard objects such as steel wire balls to avoid scratching the body.

2. Clean the filter

When using filter paper as the filter medium, you can use a soft brush to remove the dust on the filter paper. Be careful when brushing dust and do not damage the filter paper; use a flannel as a filter medium filter, clean it with cold water Dry, do not use hot water to soak, and do not dry.

3. Remove odor

Before using the vacuum cleaner, cotton can be dipped in lemon juice and placed in the dirt tube of the vacuum cleaner to remove peculiar smells.

4. Clean the dust bag

Pour out the dust and debris in the dust bag, clean it with detergent, then wash it with water and dry it. In addition to brushing the part where the vacuum cleaner is attached to the ground, you can also use toothpicks or bamboo sticks to take out the entangled garbage.